Whether your old door is dented, drafty, or simply worn out after years of Arizona sun, the first question is always the same: how much does a new garage door cost? This guide breaks down typical installed prices in Gilbert and the East Valley by door size and type, what’s included, what pushes the price up or down, and whether an insulated door is worth it in our heat.
These are typical installed prices in the East Valley, including removal and haul-away of the old door:
| Door | Typical installed cost |
|---|---|
| Single door, basic steel (non-insulated) | $700–$1,200 |
| Single door, insulated steel | $900–$1,600 |
| Double door, basic steel (non-insulated) | $1,000–$1,800 |
| Double door, insulated steel | $1,500–$2,800 |
| Wood-look, carriage-house, or glass & aluminum | $2,500–$5,000+ |
| Oversized, three-car, or RV door | Quoted after measuring |
If you’re weighing a new door against fixing the old one, our garage door repair cost guide shows what common repairs cost for comparison.
A proper installation quote should be all-in. When you compare prices, make sure it covers:
• Removal and haul-away of the old door and hardware.
• New tracks, rollers, and hinges matched to the new door’s weight.
• New springs sized for the door. A heavier insulated door needs different springs than the one it replaces, which is why spring type and sizing matter.
• Weather seals along the bottom and sides to keep out dust, heat, and monsoon rain.
• Balancing and opener setup: the door is balanced, your existing opener is reconnected and its travel and safety reverse are tested.
A quote that leaves any of these out can look cheaper and end up costing more. Our garage door installation pricing is one flat price after a quick measure, with the old door hauled away.
• Size. A double door costs more than a single door, and oversized or three-car openings cost more again.
• Material. Steel is the most popular and affordable choice. Wood-look composites, real wood, and glass-and-aluminum modern doors cost more.
• Insulation. Non-insulated, single-layer doors are cheapest. Insulated doors cost more but perform much better in Arizona heat (see below).
• Windows and style. Window sections, decorative hardware, and carriage-house designs add to the price.
• A new opener. If your opener is older or underpowered for a heavier door, replacing it at the same time saves a separate visit. A new opener installed typically runs $250–$650; our opener repair vs. replacement guide explains the options.
• The opening itself. Changing the size of the opening is structural work, so it costs more and may need a permit. Check with your city first.
For most Gilbert homes, yes. A single-layer steel door is a thin sheet of metal facing the sun, so in summer the garage behind it gets very hot. Insulation is measured as R-value, where higher means better resistance to heat:
• Non-insulated (single-layer steel): little to no insulation. It’s the cheapest option, but the garage gets hot.
• Polystyrene-insulated: roughly R-6 to R-9. A solid middle ground.
• Polyurethane-insulated: roughly R-12 to R-18. The best heat resistance, and usually the strongest and quietest construction.
An insulated door is especially worth it if your garage is attached to the house, sits under a bedroom, or doubles as a workshop or gym. It also tends to resist dents better and runs more quietly. If your current door is old and uninsulated, that alone is one of the signs it’s time to replace your garage door.
A new door isn’t always the answer. If only one or two sections are dented and the door is otherwise in good shape, garage door panel replacement (typically $250–$800 per panel) can restore the look for much less. That works only if a matching panel is still available for your door’s brand, model, and color. See our full guide to garage door panel replacement cost.
Replacing the whole door usually makes more sense when:
• Several sections are damaged, rusted, or warped.
• The door needs repairs every few months.
• Matching panels for your model are no longer made.
• The door is 15–20+ years old, uninsulated, or noisy.
1. Measure and choose. The technician measures the opening, headroom, and side room, and helps you pick a door that fits your home, budget, and HOA rules.
2. Order. Standard steel doors are often available quickly; custom styles and colors take longer.
3. Remove the old door. The old springs are safely unwound before the door comes down.
4. Install. New tracks, sections, springs, and seals go in, and the door is balanced.
5. Test. The opener is reconnected and its travel and safety reverse are tested, and the old door is hauled away.
Most standard single or double door installations take about 3–5 hours on the day, including removing the old door.
• Check your HOA first. Many Gilbert neighborhoods, from Power Ranch to Val Vista Lakes and Morrison Ranch, have HOAs with rules on garage door style and color. Get approval before you order.
• Think about sun exposure. West- and south-facing doors take the most heat and UV. Lighter colors reflect more heat, and a good factory finish holds up better to fading.
• Seal out the dust. Fresh bottom and side seals help keep out desert dust and monsoon rain.
• Plan for upkeep. A new door still needs a yearly tune-up to keep the springs, rollers, and opener in good shape.
We help homeowners with new garage door installation across Gilbert and nearby Mesa, Chandler, and Queen Creek, including wider three-car and shop doors.
Every opening is a little different, so the only way to get an exact number is a quick measure. Call (480) 896-9802 and we’ll connect you with a local installer for a flat, all-in quote on your new garage door before any work begins.
A new garage door in Gilbert typically costs about $700–$1,200 for a basic single door and $1,000–$2,800 for a standard double door, installed, with insulated steel at the upper end. Custom, wood-look, or glass-and-aluminum doors can run $2,500 to $5,000 or more. The exact price depends on size, material, insulation, and style.
For most homes, yes. A single-layer steel door lets the garage get very hot in summer, while an insulated door (roughly R-6 to R-18) keeps it noticeably cooler, runs more quietly, and resists dents better. It’s especially worth it if the garage is attached to the house or used as a workspace.
Most standard single or double garage door installations take about 3–5 hours on the day, including removing and hauling away the old door. Custom doors may take longer to order before the installation day.
If your opener is more than 10–15 years old or struggles with the door, replacing it together with the door is usually worth it, since it saves a second visit. A new opener installed typically costs $250–$650. A newer opener that works well can usually stay.
Often, yes. If only one or two sections are damaged and a matching panel is still made for your door, panel replacement typically costs $250–$800 per panel. If several sections are damaged or the panels are discontinued, a new door is usually the better value.
A well-maintained garage door typically lasts 15 to 30 years, depending on the material, how often it’s used, and how well it’s maintained. Springs and openers wear out sooner and are replaced along the way.
